Question about item
Description
Accessories | GOLD TIP - Bushing
Pin bushings form the rear end of the shaft and are glued in place. The pin that still protrudes after gluing in is the receptacle for the pin nock. This pin is universal, just like the receptacle in all pin cams, so that every pin cam fits on the pin bushing.
The indicated diameters and spines refer to the inner diameters of the respective shaft models. The Standard Pin Bushing is suitable for all carbon shafts with a shaft diameter of 0.246 inch.
Variants:
- Pierce | Ø 0.166 inch
- Spine 250-300: 9.5gr
- Spine 340-500: 9.5gr
- Spine 600-700: 9.2gr
- Kinetic / Kaos | Ø 0.204 inch
- Spine 200-300: 11.5 gr
- Spine 340-500: 11.5gr
- Standard | Ø 0.246 inch
- all Spines: 11.6gr
- Series 22 | Ø 0.246 inch
- all spines: 14gr
Scope of delivery:
1 piece or 12 pieces (depending on variant).
