Question about item
Description
BEITER Compound Rest - 2 Finger-arrow rest
At first
glance, the BEITER Compound arrow rest appears solid and chunky. However, the
relatively low weight is astonishing! Stability is a maxim, but so is the
innovative adjustment mechanism, which allows for both height and lateral
adjustment.
And all this with an accuracy of two tenths of a
millimeter... you can even adjust the group instead of moving the sight! The two
guide plates on the finger are designed to minimize the back swing while the
arrow is leaving the shelf, and to stiffen the launcher itself so that it guides
the arrow through the shelf as far as possible. Some of the unique features of
the Beiter Compound Arrow Rest: - no locking screws
The horizontal and
vertical adjustment of the rest is infinitely variable and does not require any
screws to be loosened or tightened - Maximum Precision: thanks to the innovative
construction of the guide, the adjustment of the rest is very precise and
without any tolerance - Reproducibility: both the vertical and the horizontal
millimeter scale have a vernier (or Vernier Scale), which allows to adjust the
rest to an accuracy of 2 tenths of a millimeter (0.2mm) The adjustment can be
reset reproducibly - The launcher can be shot with a 30° or a 35° inclination by
means of two exchangeable blocks - Guide plates: guide plates of different
lengths above and below the launcher change the rigidity of the support and
prevent it from "swinging".
The bar on the lower side gives the support
the possibility to guide the arrow from the beginning on sideways in the best
possible way. - Fixing screw 5/16"-24 made of stainless steel with an extremely
flat but large head diameter with hexagon socket. The washer is made of highly
impact-resistant plastic and allows for strong tightening of the screw. -
Counter screw with screw lock for optimal attachment to the bow. The screw lock
prevents damage to the bow. - Different launchers for different arrow diameters
and different thicknesses will be available. - For use with the Hoyt Carbon
Matrix a small modification of the guide plate of the middle section would be
necessary (information from the dealer!) Available as right- or left-handed
model.
Important!
When using a Hoyt Carbon Matrix, approx. 4mm
of material must be sanded vertically on the aluminium plate of the bow so that
the arrow rest can be attached to the bow. The aluminium plate at the end of the
Hoyt Carbon Matrix has no supporting function, therefore material can be sanded
off without problems. Please note that no warranty claims can be accepted for
changes to the bow.
Notes on delivery time
Please note the following information on the stated and actual delivery time:
You are purchasing an item that we do not have in stock ourselves, but order from a wholesaler for you. As a rule, it will be with us in approx. 5-7 working days and can then be dispatched to you immediately. For this reason, a maximum delivery time of 8-9 working days is displayed in the order form.
However, our shop system cannot display the stock levels of wholesalers and suppliers. Even the wholesaler cannot always have every variation in stock. It may therefore be the case that the item has to be ordered directly from the manufacturer (Asia, America). In this case, the delivery time can be extended to up to 12 weeks. In special cases, the item will be made for you and may have an even longer waiting time.
After finalising your order and checking the availability of your items, you will receive information from us with a more precise delivery time. If possible, we will also offer you alternatives that can be delivered more quickly.
Thank you for your understanding.
