Question about item
Description
LEITOLD Lying rabbit - Black Edition
The 3D animal comes in the Black Edition, i.e. without painting and can be colored by the archer. A tip in advance: Before you start painting, sand the 3D animal slightly with the rough side of a sponge and get acrylic paint for the design. And off you go!
In order to provide its customers with the best possible quality, the 3D animals of LEITOLD are manufactured purely by hand and using only the highest quality materials.
LEITOLD pays special attention to the UV-resistance of its products, as nothing is more unappealing and useless than a disintegrating 3D animal that can no longer withstand arrows. Therefore, only high-quality UV-resistant polyurethanes are used and the fine-pored inner material is protected by an approx. 2mm thick, dyed integral layer. The 3D targets are also highly resistant to scratches as a result.
A special advantage of the LEITOLD 3D animals is that they are all produced in one piece - except for the standing grizzly and the crocodile. This prevents water from penetrating into the animals or getting between the individual parts and causing damage. A misalignment between the parts or different expansions at high heat are of course also a problem of the past.
The individual classification of the 3D targets is determined according to the IFAA rule book 2007 - 2008 by measuring the length of a vertical line that runs through the center as well as the central and inner scoring zones.
Measurements:
Height: 27.5cm
Width: 14cm
Depth: 43cm
IFAA-group: 4
Outer kill: 13.7cm
WA-group: 4
Score zones: 3
Weight: 1kg
Delivery contents:
1 piece
The 3D animal comes in the Black Edition, i.e. without painting and can be colored by the archer. A tip in advance: Before you start painting, sand the 3D animal slightly with the rough side of a sponge and get acrylic paint for the design. And off you go!
In order to provide its customers with the best possible quality, the 3D animals of LEITOLD are manufactured purely by hand and using only the highest quality materials.
LEITOLD pays special attention to the UV-resistance of its products, as nothing is more unappealing and useless than a disintegrating 3D animal that can no longer withstand arrows. Therefore, only high-quality UV-resistant polyurethanes are used and the fine-pored inner material is protected by an approx. 2mm thick, dyed integral layer. The 3D targets are also highly resistant to scratches as a result.
A special advantage of the LEITOLD 3D animals is that they are all produced in one piece - except for the standing grizzly and the crocodile. This prevents water from penetrating into the animals or getting between the individual parts and causing damage. A misalignment between the parts or different expansions at high heat are of course also a problem of the past.
The individual classification of the 3D targets is determined according to the IFAA rule book 2007 - 2008 by measuring the length of a vertical line that runs through the center as well as the central and inner scoring zones.
Measurements:
Height: 27.5cm
Width: 14cm
Depth: 43cm
IFAA-group: 4
Outer kill: 13.7cm
WA-group: 4
Score zones: 3
Weight: 1kg
Delivery contents:
1 piece
