Question about item
Description
JACKALOPE Zircon - ILF - 66-70" - 16-40 lbs
The perfect limbs for beginning archers! Made of black fibreglass laminate with a core of high-quality maple and macore wood, the JACKALOPE Zircon ILF limbs offer everything you need for a successful start: good stability, excellent performance and a wide range of draw weights and bow lengths.
The "ILF" in the name of the JACKALOPE Zircon limbs stands for the International Limb Fitting System - ILF-System for short - which identifies them as plug-in limbs and makes them universal. With the ILF system, the limbs are not screwed to the handle but simply inserted into the corresponding holders. The holders are standardised and ensure that the limbs can be used with all ILF handle.
JACKALOPE - The new archery brand
Modern, high-quality materials and the simple elegance of archery. - This is JACKALOPE, the new, innovative archery brand. Jackalope stands for a whole range of beautifully crafted long, recurve and hybrid bows, as well as various safety articles and accessories.
With JACKALOPE you will find everything you need for this sport. Its sophisticated design is not only limited to the bows but is also pursued in all accessory articles. Where else, you can choose your accessories and color matching the bow? Only with Jackalope!
Specification:
Technical data:
Bow length (with 25" handle): 66, 68 or 70"
Draw weight: 16-40 lbs
Material (limbs): maple and macore in core, fibreglass laminate
Material (Tips): Makore, Bakelite
Colour: black, brown with a high gloss finish
Important notice:
The bow length and draft weight are given for the use of limbs with a 25 " handle. When using a shorter handle, the bow length is reduced accordingly and the draw weight increases by 2 lbs per 2 "es shorter bow length. For example, the use of a 23 " handle also results in a 2" shorter bow length and 2 lbs more draw weight.
Delivery include:
1 x pair
Characteristics
| Draw Weight: | 11-20 lbs21-30 lbs31-40 lbs |
| Fast-Flight: | Fast-Flight suitable |
| Limbs Material: | WoodFibreglass |
| Screw on or ILF Limbs: | ILF Limbs |
Notes on draw weight & bow length
Limb labelling
The limbs of a bow are always labelled with an inscription that not only indicates the draw weight of the limbs, but also the length of the riser or the bow length to which the draw weight refers. This labelling can look like this, for example:
25 lbs @ 19 inches or
19H 25 lbs 62 inches or
25 lbs @ 62 inches or also
62 inches / 25 lbs
If no length of the riser is specified, a 25 inch riser is usually the basis for the draw weight specification. In the case of special bows where the limbs are only suitable for the respective riser, the draw weight is of course based on the corresponding riser.
Many limbs are also available in three different lengths - usually called short, medium and long - with which the bow lengths 66, 68 and 70 inches can be achieved despite the same riser.
Converting the draw weight and bow length
Many limbs have universal mounting options that allow them to be used at least on different risers from one manufacturer or even across manufacturers. However, it is important to note that the use of a shorter or longer riser will result in a change in bow length and draw weight.
As a rule of thumb, you can remember the following:
-2 inch riser length = -2 inch bow length & +2 lbs draw weight
or
+2 inch riser length = +2 inch bow length & -2 lbs draw weight
I.e.: If the riser is 2 inches shorter than the length to which the draw weight specification on the limbs refers, the bow is 2 inches shorter and the specified draw weight increases by 2 lbs.
Example table for limbs with the draw weight specification for a 25 inch riser (e.g. 20 lbs @ 25 inches) and a bow length of 68 inches. The table is incomplete and can be continued as required depending on the centre section length.
