Question about item
Description
STRONGHOLD Foam Archery Target STRIPE Medium
- Made in Germany -
The STRONGHOLD Target System STRIPE is manufactured in sandwich construction. This means that the individual strips of the discs can be changed depending on the stress and wear, which has a positive effect on the service life.
In this model, several individual foam layers, each 10cm high, are fixed on top of each other. These are replaceable after high stress and wear. For stabilization, the disc is wood-framed at the top and bottom.
The individual 10cm thick Foam Archery Targets are welded in individual 2cm thick layers. Between the individual layers there is a stop layer, thus the SHTF material achieves its high stopping effect and causes the arrows to be pulled out easily.
- suitable for bows with medium draw weight up to approx. 45lbs
- feather-light and insensitive to wind and weather
- very soft and super easy pull out of the arrows
- interchangeable system for longer durability
Sizes/Weights:
60x60x20cm / 3,1kg
80x80x20cm / 5,3kg
100x100x20cm / 8,0kg
120x120x20cm / 11,5kg
Material:
STRONGHOLD Target Foam SHTF 300
Note: the specification "up to 45lbs" refers to the target being shot with an aluminum arrow suitable for the respective draw weight of the test bow. With carbon arrows, which are usually thinner and faster, a certain margin upwards must be calculated in, the 45lbs specification may then no longer be applicable.
Characteristics
| Material of the target: | Foam material |
| Manufacturer's information: | Manufacturer's name: |
